With the chimney heat recuperator you will turn your chimney into an authentic heat pump with the hot air pipe system.

With the chimney heat recuperator you will turn your chimney into an authentic heat pump with the hot air pipe system.

 

Perhaps you have heard of the paradox that classic fireplace heat consumes more than it produces. The design and technology of the chimneys have improved over the years , but it remains a fact. A fireplace is often not cost effective to heat your home .

In fact , only 10-20 % of the heat goes to the house , the rest goes up the chimney. This means that the fuel wood, for example, for 100 ? , 80-90 ? consumption go abroad and only 10 to 20 ? go to heat the room .

The problem is simple. A fireplace with a damper open air pumped much needed for combustion. Where does all this air? Of course , in the room, it replaces it with cold outside air 

This problem may occur even when the fireplace is not used. If you open the gate , have a natural airflow , which leads in the same way that the hot air from the fireplace room and replaced by cold air. But even with the damper closed the fireplace not completely closed. The losses are reduced but not to zero .

The solution to the problem is here and has a name, ECOHOT .

Ecohot helps maximize the usefulness of your existing fireplace by blowing the heat into the room where . A typical chimney generates heat only in a small area around it , while the majority of the heat is moved up the chimney. Corrects this problem Ecohot blowing all this heat loss to the room. Once this useful heat is pushed out , then will make its way throughout the home , providing you an easy source of heat in winter . Imagine the savings. You could cut your heating bill in half.

The ecohot fits any standard 220 volts which is close to the fireplace and uses little energy to work.

• The fireplace offers maximum economy , building heat loss from the fireplace , turning it into useful heat in your room and minimizing consumption.
• It is portable and easy to install .
• Made of stainless steel AISI 304 F42 . Provides maximum heat resistance.
• CE Certification . Manufactured to ISO 9001 standards .
• Measures: 
• Width: 50 cm
• Length: 50 - 77 cm (Extensible)
• Height: 47 cm

With regard to the environment , consumption is only 62 watts delivering 15,000 watts of thermal energy ( the equivalent of 3 typical air conditioners room or about 50,000 BTU ) . The recycling of waste heat from the fireplace achieves incredible savings , but it also helps conserve resources in the environment.

HIgh Quality

Sophisticated processes make a decisive contribution to the quality of our products or services. By implementing standards ISO 9001:2008 certification ensures that our product meets the specific requirements and ensures continuous development through a continuous improvement process ( CIP).