Concrete labor pool 6 X 3
Product no.: PIC6x3H
15,476.72 €
incl. VAT, plus delivery
Delivery time: 1 day(s)
Description
Labor pool with concrete blocks of 6X3 square meters. We build your pool in your home everywhere
General characteristics:
- Typology: Rectangular
- Water purification: Filtration set formed by a system of
- cleaning based on Silex Filter technology.
- Internal dimensions: From 6.00 x 3.00 to 1.60 m. Max deep
- Roman or square interior / exterior staircase: YES
- Lighting: YES
CONSTRUCTION OF THE VESSEL AND THE STRUCTURE
- Construction of the exterior formwork of walls with 20 cm concrete blocks. and REA rods of 12 mm. reinforced concrete filling.
- Finished with a layer of HidroFix waterproof elastic mortar.
- Staking out the pool
- Preparation of the screed using gravels 20 mm, with a thickness of 10 cm
- Supply, distribution and gravel leveling according to pool depth
- Placing 150x150x6 mm mesh reinforcement on the pool floor
- Supply and placement of reinforced concrete on the pool floor
- Construction with 20 cm concrete blocks. Reinforced concrete filling with 12 mm rods. vertical every 25 cm and horizontal every 25 cm (For each row of blocks there is a horizontal rod and for each row of vertical blocks there is another rod)
- Height and upper perimeter band formed by 6 rods of 12mm diameter. in wall and 3 in wall for coronation stone.
- Finish with a layer of HIDROFIX waterproof elastic mortar
- STANDARD EN-14.491 waterproof membrane with hydraulic cements, modified with polymers, as follows:
- Wet the pool structure, once the Hidrofix bag has been mixed with water, we apply a layer with a fine trowel, this
- layer will not be more than 2 mm. thick, let it dry for approximately 4 hours. The ceramic pieces will be glued with a glue cement that complies with the regulations of
- grip.
- Construction of perimeter band in the upper part for the placement of the crowning stone.
- Perimeter ground connection to the vessel with an iron rod.
- 10 cm iron. concrete for the treatment plant.
MATERIALS
- Concrete Ha / 25 / b / 12 / lla
- Iron B500S
- S275 steel
- Special grip glue cement pools
- Special wedding pools
PURIFICATION TEAM
- Pool volume capacity: 47.90 m3
- Filter equipment model: 760
- Total filtering surface: 0.45 m2
- Filtering system: Silex
- Total pumping equipment flow: 13.70 m3 / h
- Renewal time and total volume: 3.50 h
- Installed pumps: 1 CV
- Filtration speed: 31.00 m3 / h / m2
- 1 Filter made of laminated polyester with a diameter of 760 mm, with top loading and central collector, 6-way VALVE, with a total load of 225 kgs of flint of different granulometries, 1 set of pressure gauges and supports.
- 1 1 CV pump for 14 m3 / h at 10 m.c.a. and 3000 r.p.m. With built-in pre-filter for easy access to the subtraction of thicknesses by this retentate.
- Purification equipment calculated so that the filtration speed of 31m3 / h / m2, studied to comply with the regulations of the Community where the pool will be located.