bitensión wind turbine 12V/24V

Product no.: greatwatt

739.00 €
incl. VAT, plus delivery
Delivery time: 1 day(s)

Description

Turbine Greatwatt S700 Dual Voltage 400w Marine and 600w at 12v to 24v with internal regulator.

The main features of this wind turbine are :

A wind turbine that will amazed!!

 

  • Rotation = load : The S-700 is powered by a technology called "super voltage boosting" which allows the turbine to reach charging voltage battery a wind speed very low (3m / s). The wonderful thing is that with only 300RPM 24V system can start charging. (Note: do not use 12V systems Boosting technology, but with the benefit of the unique design of the blades and alternator, its load is much better.

    electronic Aerodynamics and television.

     

    • The smallest and Powerful : With the technology applied in the high efficiency blades, control and alternator, the S-700 can provide maximum performance the world in the same size, weight and diameter of rotation.
    • Maximum protection : the S-700 offers the best protection, for example, the voltage auto-braking, slowing the turbine in strong winds (hysteresis braking), completed during a cyclone off, protecting the battery charge, etc.
    • Protection speeding : To "use" Fully wind power, the blades are stopped for speeds of 0m / s to 25m / s. Once the turbine sits a wind speed exceeding 25 m / s, will shut down completely and stop charging.
    • Constant charging current : In the same wind speed condition, when the battery is increasingly full load current of the wind generator will diminishing, but the S-600 can always maintain a constant load current, to make use of wind energy, and at the same time it can also effectively protect the battery.

      Material

       

      • Wheel CFRP : The blades are made of CFRP, and manufactured by a precise injection process, thus S-700 has the best rigidity and efficiency and minimal vibration.
      • Magnalium Frameworks : The body is made of magnalium turbine, a very corrosive and hard materials.

        Accessories

         

        • Stop Switch : We offer a stop switch (50 amps DC), which can be used to "stop" the turbine for service or any other reason. You will find it very useful and necessary. Disconnect breaker: breaker offer a slower rate (15 amps DC), which can be used to disconnect the battery and prevents the possibility of further damage in the event of a system failure or a wind generator. < / li>
        • Corrosion Inhibitor : a capsule of corrosion inhibitor is included in your wind turbine. Its main features are corrosion, sealing, heat resistant, etc., Is very useful for mounting the blades.